We've converted Pin-Lock kegs to Ball-Lock Kegs which has the advantage for some customers of a shorter keg that fits better in some refrigerators.  These kegs also come retrofitted with NEW ball lock body connects and new poppet spring assemblies making them a great value.

We replace the traditional pin-lock lid with a Ball-Lock style lid with a pull-ring style relief valve. Normally on Pin-Lock kegs you cannot release excess pressure because they come with a safety valve that cannot be activated manually to relieve pressure unless you have a special tool.

The interior and exterior are washed and rinsed and all gaskets are replaced to ensure that no soda flavor or residue is left behind. Kegs are pressure tested and are guaranteed to be holding pressure upon delivery. Please notify us within 48 hours of receipt if they are not holding pressure.

All kegs are used and have cosmetic blemishes, i.e. minor scratches, dings and stickers. These blemishes will not affect the functionality of the keg. Body connects should be removed for cleaning and sanitizing before every use. These converted ball lock kegs come with 11/16 inch body connects. We sell deep sockets for the removal of either one (KEG991).

Kegs are approximately 9" Diam. x 22.25" Height

Measurements may vary slightly.