Chugger Pump with High Temperature Stainless Steel Head (X-Dry Series)
Introducing the X-Dry Series Chugger Pumps! These pumps offer the same great quality we've come to expect from Chugger, but now feature Run-Dry Protection. Although the Chugger still needs to be primed before each use, the X-Dry Series offers a new level of protection from damage due to cavitation.
The Chugger lineup of pumps represents a great value for an even better price. These pumps are workhorses in the brewery. Featuring a robust flow rate of 7 gpm, and a magnetic drive designed to handle back-pressure, these pumps are a great addition to any brewing setup! The Stainless Steel Chugger showcases their molded Stainless Steel Pump Head. This stainless pump is a steal for the price, and we've been more than happy with the quality! Use this to ease transfers between kettles, cool wort via a counter flow chiller, or recirculate ice water for quicker chilling!
The Chugger pump has 1/2" mpt inlet and outlet, allowing easy configuration for any application! We recommend setting these pumps up with a Ball valve on the outflow side, this way you can throttle down the outgoing flow rate, allowing for more efficient sparges or cooling! The pump head can also be rotated 360° (in 90° intervals) allowing for even more customization!
- Run Dry Carbon Bearing
- Stainless Steel Pump Head
- 1/2" mpt inlet and outlet
- 115v 55" cord and plug attached
- 50/60 Hz, 1.4 amp
- 1/20 HP, 3500 RPM
- No more issues with cross threading plastic heads or snapping off fittings
Note: When using silicone tubing, we recommend using a slightly larger barb than the I.D. of the tubing. This is because silicone tubing tends to have greater pliability than most tubing. For example, when using 1/2" silicone tubing, we recommend our 5/8" barb (H620), to help ensure a better seal!
|Length||6 Inch (15.24 cm)|
|Width||5.25 in (13.34 cm)|
|Height||4 Inch (10.16 cm)|
|Max Flow||7 GPM|
|Max Head||18.6 Feet|
|Hertz||50 / 60 Hz|
|Max Temperature||250 ° F|
- On sale!
The CHUGGER PUMP® XCPSS-IN-1 with Run Dry Protection, Stainless Steel Inline model 115V is a homebrew beer pump which is typically used to transfer hot and or cold liquids between brewing vessels.
Same pump as the CPSS-IN-1 but with FDA Approved Run Dry Carbon Bearing Material.
1/2″ MPT Connections