shopping_cart
My Cart
(0)
JaDeD King Cobra Copper Immersion Chiller - Optimized for Stock Pot Brewing
Details
The King Cobra™ is the first immersion chiller designed specifically for “stock pot” type brewing kettles.
Its unique design allows for maximum chilling power and efficiency in wide kettles.
With the King Cobra™, you can keep all of the chilling power where it needs to be. IN THE WORT!
Similar to JaDeD Brewing’s Hydra™ wort chiller, the King Cobra™ consists of three, 25’ - 3/8” chillers running in parallel, taking the King Cobra™ only 3.5 minutes to chill 5 gallons of wort to 68 degrees Farenheit using 58 degree Farenheit tap water!
The solid brass garden hose fittings are threaded onto soldered 1/2" MIP fittings on the chiller, which is superior to a compression fittings that can leak.
All JaDeD chillers use potable water safe, lead free solder for soldered connections.
Specs
| Material | Copper |
| Length | 75.0' (23 m) |
| Diameter | 14.0" (35.56 cm) |
| Outer Diameter | 3/8" (9.5 mm) |
$174.99 to $184.99
- Chilling coils: 14”diameter, 4” high
- Input/output: 20” to the bottom of the bend ("Tall" height is 25" to the bottom of the bend)
- Chilling coils: 14”diameter, 4” high
- Input/output: 20” to the bottom of the bend ("Tall" height is 25" to the bottom of the bend)
Reviews